RSS

Tag Archives: Airtel DTH

Airtel universal remote setup!

Airtel brings you the magical universal remote so that you can enjoy watching TV with just one remote. While our installation team will set up the remote to work with your brand of TV, the following steps gives you an overview of making the remote learn:

There are 5 basic functions which your new Airtel remote needs to learn about your TV
1. TV Power code
2. TV Mute code
3. AV code
4. TV VOL + code
5. TV VOL – code

Step 1: Bring Airtel digital TV remote in learning mode. Press and hold ‘’OK + Numeric 2” key for 3 seconds. The LED blinks twice to indicate that your Airtel remote is ready to learn.

Step 2 : Hold the source remote and Airtel remote in front of each other ( 3cm-6m apart).

Step 3: Press & release the key (First on Airtel remote and then on Source remote) which needs to be programmed in Airtel remote.
Example: Press and release the TV Power key on both remotes and release. The Airtel remote blinks twice to indicate a successful learning of ‘TV power code’.

Step 4: Now Press & release other keys ( on both remotes simultaneously) : Mute , AV, Vol +/-.

Step 5: Press “OK” on Airtel remote to store the new information about your TV. The LED will blink twice to indicate successful transfer to knowledge from your current TV remote to the new Airtel remote.

If the Airtel remote blinks four times, it means the learning failed. Go to Step 1 again

Disclaimer:- The remote can be programmed to work with the majority of the TVs, however not all manufacturers and model numbers are supported.

Reset Airtel Digital TV remote to defaults:-

1)Press red and ok button together for 3 seconds. Red LED blinks twice.
2)Release both buttons.
3)Then press 9 8 0
4)Press ok.
Now your adtv remote is reset and can be configured again.

 
Leave a comment

Posted by on July 6, 2013 in Airtel

 

Tags: ,

 
%d bloggers like this: