RSS

Author Archives: due3die

Clash of Clans Game Request:

GREETINGS FROM DINO HUNTER

Founded in January 2015, Dino Hunter is a war clan. Dino Hunter is the home to some of the finest Clashers from various countries, and we’re always looking for new genuine players who share the same enthusiasm as the Martians.

OUR POLICIES

No Rushed Bases
We expect every member of Dino Hunter to max out everything before upgrading their Town Hall. Not upgrading even a single troop or wall is considered rushing.

Upgrade Protocol
We expect all our members to strictly follow our upgrade protocol, as it helps us to keep the overall war weight low. We expect you to upgrade everything in order, and putting more than one builder on defenses is strictly prohibited.

War Participation
Before you can join clan wars, we require you to show different war attacks in friendly challenges. We expect every new player to opt-in and be ready for clan wars.

Use ClashTrack
We use ClashTrack to avoid clashes on battle day. A new code is generated and sent in clan mail before every war. Every player must go to clashtrack.com with that code and enter their name against the number of base they are going to attack. Each call lasts for 2 hours, that gives each player 2 hours to plan and execute their attack. A player is only allowed to have one active call at a time.

Timely Raids
We follow the bottom to top approach on battle day. All TH7s should use both of their war raids within first 4 hours. All TH8s air-attackers should finish their raids within first 8 hours, and the rest of the TH9 players should get in their attacks within first 12 hours of war.

No Loot Attacks
Loot attacks are banned in clan wars. If all your opponents are 3-starred, we expect you to practice war attacks using different combinations instead of attacking higher Town Hall for loot.

DISCORD SERVER

APPLY FOR VISA & JOIN

Advertisements
 
Leave a comment

Posted by on March 9, 2017 in Clash of Clans

 

Tags: , , , ,

How to clear windows server backup history?

Windows Server Backup is the built-in tool in Windows Server 2008/R2 that allows you to backup and restore files, folders, and critical system data such as the System State, entire volumes and even the full server itself.

After using it, Windows Server Backup will begin to display a log of recent backup and restore operations. This log allows the administrator to keep track of what backup and restore operations were taken on that server, and may be quite useful especially when having many people dealing with your servers.

While useful, sometimes one might want to delete or clear that list of log entries. Strangely, there’s no obvious place, button, command or checkbox you can use to clear that log.

After some digging, we found a workaround.

Clearing Windows Server Event Log

To clear the event log:

  1. Open Event Viewer from the Administrative Tools folder.

  2. Go to Applications and Services Logs.

  3. Expand Microsoft > Windows > Backup.

  4. Right click on the Operational Channel log and choose Save and Clear or just Clear in case you don’t want to save the existing log (we suggest you save the logs before clearing for any future reference).

clear-wsb-logs-1

clear-wsb-logs-3

Now, if you open Windows Server Backup, you’ll see that the log is empty.

clear-wsb-logs-4

Clearing Windows Server Backup Status Catalog

Use this below command in PowerShell.

wbadmin delete catalog

Deletes the backup catalog on the local computer. Use this subcommand only if the backup catalog on this computer is corrupted and you have no backups stored at another location that you can use to restore the catalog.

 
Leave a comment

Posted by on December 19, 2016 in Windows

 

Tags: , , , , ,

Microsoft Security Essentials Error 0x8004FF81

Just a tiny registry fix is enough to fix the problem. For that you have to launch registry editor in Administrator Mode.

  1. Type regedit in Start > Run box.
  2. And then go to HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options.
  3. Here you have to find svchost.exe in 'Debugger' entry from here you have to remove the "svchost.exe" in the following entry Msconfig.exe, MpCmdRun.exe, MpUXSrv.exe, MSASCui.exe, msmpeng.exe, and msseces.exe.

And from msconfig disable auto-launch of non Microsoft applications. And then restart the PC that’s all.

 
Leave a comment

Posted by on March 15, 2016 in Windows

 

Tags: , , ,

Windows \EFI\Microsoft\Boot\BCD Error.

Windows EFI Error W

Based on the Above ScreenShot, I suggest trying the following steps to troubleshoot the issue.

Method 1: Startup Repair from the Windows Recovery Environment (WinRE)

  1. Insert the Windows installation disc into the disc drive, and then start the computer.

  2. Press any key when the message indicating “Press any key to boot from CD or DVD…” appears.

  3. Select a language, a time and currency, and a keyboard or input method, and then click Next.

  4. Click Repair your computer in the lower left corner.

  5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next.

  6. At the System Recovery Options Dialog Box, click on Repair your computer.

  7. Click the operating system that you want to repair, and then click Next.

  8. In the System Recovery Options dialog box, click Startup Repair.

Method 2: Rebuild BCD

  1. Insert the Windows installation disc into the disc drive, and then start the computer.

  2. Press any key when the message indicating “Press any key to boot from CD or DVD…” appears.

  3. Select a language, a time and currency, and a keyboard or input method, and then click Next.

  4. Click Repair your computer in the lower left corner.

  5. Click the operating system that you want to repair, and then click Next.

  6. In the System Recovery Options dialog box, click Command Prompt.

  7. Type BOOTREC /FIXMBR and then press ENTER.

  8. Type BOOTREC /FIXBOOT and then press ENTER.

  9. Type BOOTREC /REBUILDBCD and then press ENTER.

Method 3: Use the Windows Recovery Environment (WinRE) to run System Restore

  1. Insert the Windows installation disc into the disc drive, and then start the computer.

  2. Press any key when the message indicating “Press any key to boot from CD or DVD…” appears.

  3. Select a language, a time and currency, and a keyboard or input method, and then click Next.

  4. Click Repair your computer in the lower left corner.

  5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next.

  6. At the System Recovery Options Dialog Box, click on System Restore.

  7. Follow the System Restore Wizard instruction as usual and choose the appropriate restore point.

  8. Click Finish to restore the system.

Hope it helps.

 
Leave a comment

Posted by on January 20, 2014 in Windows

 

Tags: , , , , , , , , , ,

Clear All Windows 2008 R2 event logs!

If you want to clear the event logs in a Windows Server system, you can fire up Event Viewer, browse to the desired log and from the Actions menu select Clear Log….
But if you want to clear all the System and Application logs at once, you’d better use the ‘wevtutil’ command-line utility Microsoft offers. A Windows PowerShell command like this will do the job.

Run PowerShell as Administrator and enter the below cmd.

wevtutil el | foreach { wevtutil cl $_ }

 
Leave a comment

Posted by on November 30, 2013 in Windows

 

Tags: , , , , , , ,

How To Delete A File or Folder That Won’t Delete?

I am going to explain How to delete a file or folder that won’t delete.

1. Open the run from start menu and type the “cmd” Without quote.
2. Then type the path of the folder in cmd prompt (ex.”cd /d C:\Users\\Desktop\” without quote.
3. Next we need to know the folder name so type the following cmd in cmd prompt “dir /x” without quote.
4. Then it will show a list of folders names and files names.
5. Then type a following cmd in cmd prompt “rmdir /q /s foldername” without quote.
6. Press enter the folder will be deleted.

Note:- Please follow the screenshot for your understand.

Screenshot

How to delete a file or folder that won’t delete

 
Leave a comment

Posted by on November 19, 2013 in Windows

 

Tags: , , , , , ,

“NTLDR is Missing” for Win XP

If you get the “NTLDR is Missing” error, follow these instructions:

1. Load Windows XP CD into CD drive.
2. Make sure BIOS is set to boot to CD drive.
3. Boot the computer from CD.
4. At menu, press “R” to load Recovery Console.
5. Select the installation to be fixed.
*The following instructions assume CD-ROM is labeled as drive E and the hard drive partition the windows installation is on is labeled as drive C. Replace the letters accordingly.
6. Type “COPY E:\i386\ntldr C:\” and press ENTER.
7. Type “COPY E:\i386\ntdetect.com C:\” and press ENTER.
8. Remove CD and type “EXIT” and press ENTER (to reboot your computer).

 
Leave a comment

Posted by on August 4, 2013 in Windows

 

Tags: , ,

 
%d bloggers like this: