RSS

Microsoft Security Essentials Error 0x8004FF81

Just a tiny registry fix is enough to fix the problem. For that you have to launch registry editor in Administrator Mode.

  1. Type regedit in Start > Run box.
  2. And then go to HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options.
  3. Here you have to find svchost.exe in 'Debugger' entry from here you have to remove the "svchost.exe" in the following entry Msconfig.exe, MpCmdRun.exe, MpUXSrv.exe, MSASCui.exe, msmpeng.exe, and msseces.exe.

And from msconfig disable auto-launch of non Microsoft applications. And then restart the PC that’s all.

 
Leave a comment

Posted by on March 15, 2016 in Windows

 

Tags: , , ,

Windows \EFI\Microsoft\Boot\BCD Error.

Windows EFI Error W

Based on the Above ScreenShot, I suggest trying the following steps to troubleshoot the issue.

Method 1: Startup Repair from the Windows Recovery Environment (WinRE)

  1. Insert the Windows installation disc into the disc drive, and then start the computer.

  2. Press any key when the message indicating “Press any key to boot from CD or DVD…” appears.

  3. Select a language, a time and currency, and a keyboard or input method, and then click Next.

  4. Click Repair your computer in the lower left corner.

  5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next.

  6. At the System Recovery Options Dialog Box, click on Repair your computer.

  7. Click the operating system that you want to repair, and then click Next.

  8. In the System Recovery Options dialog box, click Startup Repair.

Method 2: Rebuild BCD

  1. Insert the Windows installation disc into the disc drive, and then start the computer.

  2. Press any key when the message indicating “Press any key to boot from CD or DVD…” appears.

  3. Select a language, a time and currency, and a keyboard or input method, and then click Next.

  4. Click Repair your computer in the lower left corner.

  5. Click the operating system that you want to repair, and then click Next.

  6. In the System Recovery Options dialog box, click Command Prompt.

  7. Type BOOTREC /FIXMBR and then press ENTER.

  8. Type BOOTREC /FIXBOOT and then press ENTER.

  9. Type BOOTREC /REBUILDBCD and then press ENTER.

Method 3: Use the Windows Recovery Environment (WinRE) to run System Restore

  1. Insert the Windows installation disc into the disc drive, and then start the computer.

  2. Press any key when the message indicating “Press any key to boot from CD or DVD…” appears.

  3. Select a language, a time and currency, and a keyboard or input method, and then click Next.

  4. Click Repair your computer in the lower left corner.

  5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next.

  6. At the System Recovery Options Dialog Box, click on System Restore.

  7. Follow the System Restore Wizard instruction as usual and choose the appropriate restore point.

  8. Click Finish to restore the system.

Hope it helps.

 
Leave a comment

Posted by on January 20, 2014 in Windows

 

Tags: , , , , , , , , , ,

Clear All Windows 2008 R2 event logs!

If you want to clear the event logs in a Windows Server system, you can fire up Event Viewer, browse to the desired log and from the Actions menu select Clear Log….
But if you want to clear all the System and Application logs at once, you’d better use the ‘wevtutil’ command-line utility Microsoft offers. A Windows PowerShell command like this will do the job.

Run PowerShell as Administrator and enter the below cmd.

wevtutil el | foreach { wevtutil cl $_ }

 
Leave a comment

Posted by on November 30, 2013 in Windows

 

Tags: , , , , , , ,

How To Delete A File or Folder That Won’t Delete?

I am going to explain How to delete a file or folder that won’t delete.

1. Open the run from start menu and type the “cmd” Without quote.
2. Then type the path of the folder in cmd prompt (ex.”cd /d C:\Users\\Desktop\” without quote.
3. Next we need to know the folder name so type the following cmd in cmd prompt “dir /x” without quote.
4. Then it will show a list of folders names and files names.
5. Then type a following cmd in cmd prompt “rmdir /q /s foldername” without quote.
6. Press enter the folder will be deleted.

Note:- Please follow the screenshot for your understand.

Screenshot

How to delete a file or folder that won’t delete

 
Leave a comment

Posted by on November 19, 2013 in Windows

 

Tags: , , , , , ,

“NTLDR is Missing” for Win XP

If you get the “NTLDR is Missing” error, follow these instructions:

1. Load Windows XP CD into CD drive.
2. Make sure BIOS is set to boot to CD drive.
3. Boot the computer from CD.
4. At menu, press “R” to load Recovery Console.
5. Select the installation to be fixed.
*The following instructions assume CD-ROM is labeled as drive E and the hard drive partition the windows installation is on is labeled as drive C. Replace the letters accordingly.
6. Type “COPY E:\i386\ntldr C:\” and press ENTER.
7. Type “COPY E:\i386\ntdetect.com C:\” and press ENTER.
8. Remove CD and type “EXIT” and press ENTER (to reboot your computer).

 
Leave a comment

Posted by on August 4, 2013 in Windows

 

Tags: , ,

Airtel universal remote setup!

Airtel brings you the magical universal remote so that you can enjoy watching TV with just one remote. While our installation team will set up the remote to work with your brand of TV, the following steps gives you an overview of making the remote learn:

There are 5 basic functions which your new Airtel remote needs to learn about your TV
1. TV Power code
2. TV Mute code
3. AV code
4. TV VOL + code
5. TV VOL – code

Step 1: Bring Airtel digital TV remote in learning mode. Press and hold ‘’OK + Numeric 2” key for 3 seconds. The LED blinks twice to indicate that your Airtel remote is ready to learn.

Step 2 : Hold the source remote and Airtel remote in front of each other ( 3cm-6m apart).

Step 3: Press & release the key (First on Airtel remote and then on Source remote) which needs to be programmed in Airtel remote.
Example: Press and release the TV Power key on both remotes and release. The Airtel remote blinks twice to indicate a successful learning of ‘TV power code’.

Step 4: Now Press & release other keys ( on both remotes simultaneously) : Mute , AV, Vol +/-.

Step 5: Press “OK” on Airtel remote to store the new information about your TV. The LED will blink twice to indicate successful transfer to knowledge from your current TV remote to the new Airtel remote.

If the Airtel remote blinks four times, it means the learning failed. Go to Step 1 again

Disclaimer:- The remote can be programmed to work with the majority of the TVs, however not all manufacturers and model numbers are supported.

Reset Airtel Digital TV remote to defaults:-

1)Press red and ok button together for 3 seconds. Red LED blinks twice.
2)Release both buttons.
3)Then press 9 8 0
4)Press ok.
Now your adtv remote is reset and can be configured again.

 
Leave a comment

Posted by on July 6, 2013 in Airtel

 

Tags: ,

How to Sync an iPhone to a New Computer Without Losing Data?

By far the easiest way to sync an iPhone to a new Mac or Windows PC is to transfer all iPhone files and backups from the old computer to the new one. The necessary data is stored in several different locations, and we’ll cover what files and where they go for both Mac OS X and Windows.

A few quick notes:

  • If you only want to sync and not worry about content, the /MobileSync/Backup/ directory is all you need to copy over
  • If you want to painlessly sync music and video, you will need to transfer over the potentially large iTunes folder
  • Using a local network is the generally quickest way to move the necessary files over, but copying them to a USB drive, DVD, hard drive, etc, is fine too

This guide is aimed for iPhone users, but this would work with an iPad or iPod touch too.

Syncing an iPhone with a New Mac by Copying Sync Data

  1. Quit iTunes on both Macs and disconnect the iPhone from both Macs
  2. Open the Home folder and copy the iTunes directory from the old computer to the new one, located at:
    ~/Music/iTunes
  3. Now open the user library directory and copy the backups from the old computer to the new one, located at:
    ~/Library/Application Support/MobileSync/
  4. To be certain everything is in order, copy over iTunes Preferences files as well:
    ~/Library/Preferences/com.apple.iTunes.plist
  5. Now connect the iPhone to the new Mac, launch iTunes, confirm that everything is in order, and authorize the new computer

You should be able to even sync from an old PC or a Mac to a new PC/Mac if you use sharing between Mac and Windows to copy the iTunes and Backup folders and put them in their appropriate places.

Syncing an iPhone with a New Windows PC
The instructions are basically the same as above, but the files and folders you are looking to copy are in different locations. For Windows 7 users, you’ll want to copy the following directories and their contents from the old PC to the new PC:

C:\Users\USERNAME\Music\iTunes
C:\Users\USERNAME\AppData\Roaming\Apple Computer\MobileSync\
C:\Users\USERNAME\AppData\Roaming\Apple Computer\Preferences\

Replace “USERNAME” with the users account name, obviously. Older versions of Windows have iPhone backups located at the following location instead:

C:\Documents and Settings\USER\Application Data\Apple Computer\MobileSync\Backup

Now launch iTunes and connect the iPhone and it should sync as normal. Go ahead and authorize iTunes with the new computer as well.

 
Leave a comment

Posted by on June 10, 2013 in iPad, iPhone, iPod Touch, Mac, Windows

 

Tags: , , , ,

 
Follow

Get every new post delivered to your Inbox.

Join 363 other followers

%d bloggers like this: